Oil and Fish

OpenVPN + Shadowsocks

It can be advantageous to combine OpenVPN with Shadowsocks. OpenVPN gives perfect forward secrecy, something that Shadowsocks cannot offer, since it uses a preshared key. At the same time, Shadowsocks has superior ability to evade censorship.

Both server and client in this article run recent versions of Debian or Ubuntu.

1. Set Up Server

1.1. Choose Port for Shadowsocks

On your server, choose a random port number between 10,000 and 50,000 for Shadowsocks.

awk -v min=10000 -v max=50000 'BEGIN{srand(); print int(min+rand()*(max-min+1))}'

The example result that we will use in the rest of this article:

16273

1.2. Open Firewall

There are multiple ways to implement a firewall: nftables, iptables, ufw, and firewalld. The modern way is nftables. However, in a moment we are going to install OpenVPN with a script that uses iptables. Therefore we will use iptables to build our basic firewall. Issue each of these commands in turn:

iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT

iptables -A INPUT -i lo -j ACCEPT

iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT

Open port 22 for SSH. If you can restrict the port 22 rule so that only certain source IP addresses are whitelisted for SSH access, then so much the better.

iptables -A INPUT -p t***** --dport 22 -j ACCEPT

Add rules to open the random port you chose for Shadowsocks:

iptables -A INPUT -p t***** --dport 16273 -j ACCEPT

iptables -A INPUT -p udp --dport 16273 -j ACCEPT

Drop all unexpected input:

iptables -P INPUT DROP

Save the iptables rules so that they persist after reboots:

apt update && apt upgrade -y

apt install iptables-persistent -y

1.3. Implement BBR

Bottleneck Bandwidth and Round-trip propagation time (BBR) is a T***** congestion control algorithm developed at Google. Under certain types of network congestion, it will improve your latency. Implement BBR T***** congestion control on your server with the following commands:

cat >> /etc/sysctl.d/50-bbr.conf <<EOF
net.core.default_qdisc=fq
net.ipv4.t*****_congestion_control=bbr
EOF

sysctl -p /etc/sysctl.d/50-bbr.conf

1.4. Download Angristan OpenVPN Install Script

Get the Angristan OpenVPN script from GitHub:

wget https://raw.githubusercontent.com/angristan/openvpn-install/master/openvpn-install.sh

Make the script executable:

chmod +x openvpn-install.sh

1.5. Run Script and Create Client OVPN File

Run the Angristan OpenVPN script:

./openvpn-install.sh

You can accept the suggested default answers to most of the questions, but Shadowsocks will require OpenVPN to use T***** rather than UDP:

1. IP address should accurately reflect the IP address of your server
2. Port choice should be 1194 (it will be hidden behind Shadowsocks anyway)
3. Protocol UDP is fastest and should work with Shadowsocks, but some countries throttle or block UDP, so choose T***** if you need to
4. For DNS servers, you can choose your favorite, e.g. Cloudflare or Google
5. For enable compression, recommend n for no
6. For customized encryption settings, recommend n for no

After answering all the questions, press any key to continue and run the script. At the end of the installation, you are asked about the first client:

1. For the first client name, we will put debian10
2. For the private key file, we will put passwordless

You can check that OpenVPN is active (running) after the script finishes:

systemctl status openvpn@server

Check also that OpenVPN is listening for UDP or T***** input on port 1194:

ss -tulpn | grep 1194

1.6. Adjust Firewall Rules

If you look at the iptables firewall, you will see that the script has opened port 1194 to the public:

iptables -vnL

We want to make the OpenVPN server as invisible as possible. Therefore we will close port 1194 to the public. In a few minutes, we’ll add Shadowsocks to handle incoming traffic and pass it to OpenVPN, on the loopback interface port 1194.

Edit the iptables rules that get added when OpenVPN is brought up:

vi /etc/iptables/add-openvpn-rules.sh

Delete the line to insert an input rule accepting packets on port 1194. Save the file.

Edit the iptables rules that get removed when OpenVPN is brought down:

vi /etc/iptables/rm-openvpn-rules.sh

Delete the line deleting the input rule accepting packets on port 1194. Save the file.

Make sure that everything still works after you reboot the server:

reboot

Check the revised iptables rules:

iptables -vnL

You should see that port 1194 is no longer open to the public. Traffic that is passed from Shadowsocks to OpenVPN will still be accepted, since it uses the loopback interface (-i lo), for which we added a special iptables rule at the beginning.

1.7. Install Shadowsocks

Install Shadowsocks-Libev from the repositories:

apt install shadowsocks-libev -y

1.8. Configure Shadowsocks

Generate a strong password:

openssl rand -base64 24

The example result that we will use in the rest of this article:

r7EaFR2DshpQT+QMfQGYO5BXC2BAV8JG

Edit the Shadowsocks-Libev configuration file:

vi /etc/shadowsocks-libev/config.json

Enter your choice of configuration details. Using our example of a random port and password:

{
"server":["::1", "0.0.0.0"],
"mode":"t*****_and_udp",
"server_port":16273,
"local_port":1080,
"password":"r7EaFR2DshpQT+QMfQGYO5BXC2BAV8JG",
"timeout":300,
"method":"chacha20-ietf-poly1305"
}

Save the file.

1.9. Restart Shadowsocks

Restart Shadowsocks-Libev, check that it is working, then exit your session with the server:

systemctl restart shadowsocks-libev

systemctl status shadowsocks-libev

ss -tulpn | grep ss-server

exit

2. Set Up Client

2.1. Copy Client Configuratio File from Server to PC

Now work on your PC. Assuming that your server has IP address yy.yy.yy.yy and that you named the client file debian10.ovpn, copy the OVPN file down from the server to the client like this:

s***** [email protected]:debian10.ovpn ~/Downloads/debian10.conf

2.2. Install Shadowsocks Client

Install Shadowsocks-Libev from the repositories:

sudo apt update && sudo apt upgrade -y

sudo apt install shadowsocks-libev -y

2.3. Configure Shadowsocks Client

sudo systemctl stop shadowsocks-libev

sudo systemctl disable shadowsocks-libev

sudo vi /etc/shadowsocks-libev/config.json

Enter your server details, replacing yy.yy.yy.yy by your server’s public IP address. The port, password, and encryption method must match those on the server.

{
"server": "yy.yy.yy.yy",
"server_port": 16273,
"local_address": "127.0.0.1",
"local_port":1080,
"password": "r7EaFR2DshpQT+QMfQGYO5BXC2BAV8JG",
"method": "chacha20-ietf-poly1305",
"timeout": 300,
"fast_open": false,
"mode": "t*****_and_udp"
}

Save the file.

2.4. Start Shadowsocks

Start the local client listening on port 1080:

sudo systemctl enable shadowsocks-libev-local@config

sudo systemctl start shadowsocks-libev-local@config

sudo ss -tulpn | grep 1080

2.5. Install OpenVPN Client

Install OpenVPN for GNOME and all its dependencies from the repositories:

sudo apt install network-manager-openvpn-gnome -y

2.6. Configure OpenVPN Client

Edit the downloaded OpenVPN client configuration file:

vi ~/Downloads/debian10.conf

Add a line at the end:

socks-proxy 127.0.0.1 1080

Save the file. You can now also close your terminal.

From GNOME Settings, go to the Network page.

1. Click the plus sign to add a VPN
2. Select the option Import from file...
3. Select your downloaded ~/Downloads/debian10.conf file
4. Click Add

2.7. Add Static Route to Server

With OpenVPN and Shadowsocks running at the same time, we must prevent a routing loop. We do not want traffic for the OpenVPN server to go to the OpenVPN client, then to the Shadowsocks client, and then back to the OpenVPN client again.

On Windows, you can add route yy.yy.yy.yy 255.255.255.255 net_gateway to the OpenVPN client configuration. This does not work on a Linux client running Network Manager due to #1417169. Network Manager for OpenVPN does not support special route keywords such as vpn_gateway or net_gateway.

Therefore on a Linux client, we will add a static route at this stage.

Determine your default gateway:

ip route | grep default

Let’s say, for example, that your OpenVPN server is yy.yy.yy.yy, your default gateway is 192.168.1.254, and your real interface is enp0s3. Add a temporary static route:

sudo ip route add yy.yy.yy.yy via 192.168.1.254 dev enp0s3

The route will persist until the next reboot (or until you explicitly delete the route).

2.8. Test End-to-End

In GNOME Network Settings, toggle your newly added VPN connection to the ON position.

Open Firefox, and visit IP Chicken.

You should see the IP address of your remote server, not your local client.

3. Get Help and Report Issues

• For OpenVPN questions, post in the OpenVPN forum
• For Shadowsocks-Libev issues, see GitHub

Updated 2020-09

This site is provided for information only. It cannot replace the advice of a trained security professional. If lives or safety depend on your security, please seek the advice of an expert.